Spokane Water & Fire

Water Damage Cleanup Cost in Spokane: Typical Ranges

Short answer

One published national guide puts water cleanup at roughly $3 to $4 per square foot for clean water, $4 to $7 for gray water and $7 to $15 for sewage or flood water, with totals commonly between about $1,400 and $6,400. These are general ranges, and your job may differ.

Water or fire damage right now?

Call any time of day. If you would rather not talk yet, send a few photos and tell us what happened.

Fire, gas smell, or a risk of electric shock: leave the building and call 911 first.

The short version

No website can tell you what your cleanup will cost. The water, the rooms, the materials and the time of day all matter. What we can do is show you the ranges that published cost guides report, so that an estimate does not catch you off guard.

These figures are general, they come from published cost guides, and they are not quotes. They usually describe cleanup, drying and sometimes related work together, so they may be higher than a cleanup-only bill. Spokane prices may differ. Spokane Water & Fire does not set prices. We are a referral service, and the independent crew we connect you with prices your job and contracts with you directly.

What the guides report

  • By type of water. One national guide gives about $3 to $4 per square foot for clean water (category 1), $4 to $7 for gray water (category 2) and $7 to $15 for black water (category 3).
  • Whole-job totals. The same guide gives a national average of about $3,860 and a range of about $1,383 to $6,370.
  • Western Washington. A guide from a restoration company near Seattle lists about $1,500 to $8,000 or more for water damage in King County, with an average around $3,500 to $4,000. That is not Spokane, so treat it as a rough comparison.

Costs can run well beyond these ranges for large losses, for long-standing water, or for jobs that include rebuilding. Rebuilding is not part of the cleanup crews' work, and it is priced separately by a repair contractor.

What moves the price

1. How clean the water was. Clean water from a supply line is the lowest. Sewage and flood water need protective gear, disinfecting and disposal, and cost more. See sewage backup cleanup.

2. How much area and how many days. Drying equipment runs for days. More wet area means more equipment and more checks. See structural drying.

3. How long it sat. Water that has been there for a day or more spreads and soaks deeper. Calling early limits the damage and usually the cost.

4. Which materials got wet. Hard surfaces dry more easily than carpet pad and insulation. Dense or layered materials take longer.

5. Access. A crawl space, a finished basement or a second-floor loss with water in the ceiling below each take different steps. See crawl space water removal.

6. Time of day. Night and weekend calls can be priced differently. Ask.

7. What the crew has to move. Contents handling, furniture moves and storage add time.

8. Winter conditions. In a cold Spokane house, drying can take longer, and heat may be needed. See burst pipe cleanup.

How to read an estimate

Ask the crew to write down:

  • What areas and rooms are in the scope.
  • What equipment will be used, and for how many days.
  • Whether the price is per day, per item, per square foot or one amount.
  • What is not included, such as removing wet materials or rebuilding.
  • What happens if more is found once work starts.
  • What documents you will get for your insurer, such as moisture readings and photos.

An estimate is a guess about the unknown. Water spreads where you cannot see. Ask what could change it.

Insurance and who pays

Many homeowners policies cover sudden water damage, such as a burst pipe or a failed water heater, but not flood or sewer backup unless you bought added coverage. Your deductible comes out of what you receive. The crew can often bill your insurer directly or give you what you need to file. Read does homeowners insurance cover water damage and filing a water damage claim.

Do not delay water removal to wait for an adjuster. Keep photos and the wet materials the insurer may want to see, and ask your insurer what it needs.

How to keep the cost down

  • Stop the water and call quickly.
  • Take photos before anything is moved.
  • Move valuables to a dry area if it is safe.
  • Do not cut out materials yourself. It can make a claim harder and can be unsafe.
  • Keep records: receipts, readings, names and dates.

What we do not charge

Spokane Water & Fire charges you nothing for the referral. The crew is an independent business. You agree on a price with the crew directly before work starts.

Get help now

If you are not sure what you are dealing with, send pictures through the photo page and get help now, or call any time. Related cost pages: flooded basement cleanup cost and fire and smoke cleanup cost. We serve Spokane, Spokane Valley, Liberty Lake and Cheney.

Questions

How much does water damage cleanup cost in Spokane?

We cannot quote a price. One national guide reports about $3 to $15 per square foot, depending on the type of water. The crew prices your job after they see it.

Why does the type of water change the price?

Clean water is the easiest to dry. Gray water and sewage need more cleaning, sanitizing and protective gear, so published guides list them at higher rates.

Does Spokane Water & Fire charge me?

No. The referral is free to you. You pay the independent crew you contract with.

Should I get more than one estimate?

If time allows, yes. In an active leak, water removal cannot wait, so ask the crew to explain their pricing and get it in writing.

Last updated 2026-11-16.