Structural Drying After Water Damage in Spokane
Short answer
Removing the standing water is only the start. Wet framing, subfloor and walls need days of controlled drying, with moisture readings checked until they are normal. We connect you with an independent, certified local crew that does it.
Water or fire damage right now?
Call any time of day. If you would rather not talk yet, send a few photos and tell us what happened.
Fire, gas smell, or a risk of electric shock: leave the building and call 911 first.
Why drying is a separate job
After a leak, the first crew step pulls out the standing water. That makes the room look better. It does not make the building dry.
Water soaks into drywall, wood framing, subfloor, insulation, carpet pad and the concrete under them. It moves along studs and under baseboards. It stays in places you cannot see. If the structure stays damp, wood and drywall break down and odors build. Damp materials are also where mold can get a start, which is why drying is done on purpose and checked with instruments. We do not test for or remove mold. Drying quickly and fully is what helps prevent it.
Structural drying is the work of taking that moisture back out, on a plan, and proving it is gone.
Spokane Water & Fire is a referral service. It is not a cleanup company. We connect you with an independent, certified local cleanup crew that contracts with you directly. The referral costs you nothing.
How the crew dries a building
1. Map the wet. The crew uses a moisture meter to read walls, floors and ceilings, and often a thermal camera to spot cold, wet areas behind surfaces. They record starting readings. These are the baseline.
2. Pick the method. Different materials dry differently.
- Open surfaces, such as a wet floor, get air movers.
- Wall cavities may have small holes or panels opened so air can reach them. Where the crew finds a material that cannot be dried in place, they say so, and a separate contractor handles removal.
- Hardwood and some subfloors sometimes use special mats that pull moisture out from below.
- Closed spaces, such as a basement, get dehumidifiers to hold the air dry.
3. Set up equipment. Air movers, dehumidifiers and sometimes air scrubbers are placed so air flows across the wet areas. The crew closes off rooms that are not wet, to focus the drying.
4. Monitor. The crew comes back, usually daily, to take readings and move equipment. They log temperature, humidity and moisture content. Equipment is adjusted as areas dry.
5. Finish when the readings say so. Drying ends when the materials return to normal moisture levels, compared to dry readings from unaffected parts of the home. You can ask for the readings.
What you can do during drying
- Keep the equipment running. It is loud and warm. That is normal.
- Do not unplug a machine to use an outlet. Ask the crew to move a cord.
- Keep doors and windows closed in the drying area unless told otherwise.
- Keep children and pets away from the equipment.
- Do not turn the heat down. Warm air dries better than cold.
- Tell the crew about any new stain, smell or sound.
Spokane specifics
Winter drying. Spokane winters are long. In a cold house, drying slows down. Outside air may be cold and damp, so opening windows is rarely the answer. The City of Spokane advises keeping a home above 55 degrees, which is also the sensible floor for drying. If the heat is off after a freeze loss, tell the crew.
Older houses. Browne's Addition, Spokane's oldest neighbourhood, has about 90 homes built before 1899, and the South Hill has many houses from the streetcar era. Older houses may have layered wall finishes, thick plaster, or foundations of stone. Tell the crew the age of your house. Thick materials hold water longer and can take longer to dry.
Basements and crawl spaces. Many Spokane homes have basements or crawl spaces that stay cool. Concrete walls and soil hold moisture, so these spaces dry more slowly than upper floors. See flooded basement cleanup and crawl space water removal.
Spring snowmelt. In spring, water can arrive again if the source was groundwater and not a pipe. The crew will tell you if they think drying might be undone by a recurring source. A drainage or waterproofing contractor deals with that. We do not offer it.
What the crew does not do
The crews we connect you with do cleanup and drying only. They do not offer repairs, rebuilding, remodeling or mold services. If wet drywall, flooring or insulation cannot be dried, the crew tells you and a repair contractor handles removal and rebuilding. Do not cut out materials yourself.
Drying after sewage, creek or river water
Water from a sewer line or from creek or river flooding is contaminated. It is cleaned and sanitized first, and materials it soaked are often not worth drying. Drying then covers what remains. See sewage backup cleanup and Spokane River and Latah Creek flooding.
After a fire
Firefighting water needs drying too. In a fire, the crew combines drying with soot and odor cleaning. See fire and smoke cleanup.
Insurance and cost
Drying equipment is charged by the day in many cases, and the number of days varies. Published ranges for cleanup are on the water damage cleanup cost page. Your insurer may ask for moisture logs, photos and an invoice. Ask the crew for them. See filing a water damage claim.
Get help now
If you are unsure whether a wet area still needs drying, send pictures through the photo page and get help now, or call any time. We get a crew moving as fast as we can. We serve Spokane, Spokane Valley, Liberty Lake and Cheney.
Questions
My floor looks dry. Why call?
Water can sit inside walls, under flooring and in insulation long after the surface looks dry. A moisture meter and a thermal camera show what your eyes cannot.
How long does drying take?
It depends on the materials, how much water got in and the weather. It is usually a matter of days. The crew checks readings on each visit and stops when the structure reads dry.
Why are there so many fans and machines?
Air movers push dry air across wet surfaces. Dehumidifiers pull the moisture out of the air so it can keep absorbing more. The two work together.
Can I open windows and use my own fans instead?
In a Spokane winter, outdoor air can be cold and damp, and a house fan does not remove moisture. Equipment that controls humidity does the job better.
Does drying cut out my drywall?
Not as a rule. Many materials can be dried in place. Where they cannot, the crew will explain. A separate repair contractor handles removal and rebuilding.
Last updated 2026-11-16.